This powerful & compact Hydraulic Bolt Cutter is the ideal tool to cut Container seals, bolts, chains, drum bolts and padlocks. This battery powered cutter can easily and safely cut up to 5/8" diameter material. Eliminate cut-of saws, torches and manual bolt cutters with these bolt cutters.
Large Cu & Al cutting is finally made easy with the Robo Cut line of battery powered cutters. Just pull the trigger and 6.6 tons(534YC) or 9 tons(585YC) of cutting force go to work for you. The hydaulic system features a rapid advance for reduced cycle times. It has very sharp blades for cutting Cu & Al cable only. The open "C" type jaw makes reaching out to cut cables. Distortion of cable isminimum and cables can still be sleeved easily. This cutter has a release trigger to release tool.
The REC-50U Battery Powered Cable Slicer cuts 2" of cable with the touch of a finger. The powerful gear reduction motor pulls a moveable blade through the toughest Cu & Al cables. This compact unit comfortably fits in operators hand and just a squeeze of trigger is all that it takes to make cut. Risks of sprains, strains and lost time due to muscle injuries from ratcheting movement or force needed for manual cutters are eliminated. The moveable blade has wide gear teeth for extra cutting power and full cutting traction.
The Robo-Cut was desinged to cut the tough steel used in today's construction. It can replace an entire tool kit, including several sizes of bolt cutters, hacksaws, torches and cable cutters. This hydraulic unit features rapid advance ram for reduced cycle times. With the pull of trigger you can cut ACSR cable, guy wire, ground rod, wirerope and rebar. The specially designed flip-top latch and rotating head provide exceptional ease of use and maneuverability in tight working quarters.
The battery powered WRCC-20 is powerful compact tool is designed to cut wire rope and can be used anywhere in the workplace. This unit generates 10 metric tons of cutting force and features titanium coated high-speed steel cutting blades. This lightweight unit comes with shoulder strap for safe and easy operation. The head can rotate 180 degrees for ease of use.
Krenn Battery Powered Bolt Cutters are a powerful, compact and ergonomic tool. Quicker, easier and safer to use than traditional bolt cutters, torches and cut-off saws. They use battery powered electric motor to drive built-in hydraulic pump. There small size gives you the power of hydraulics anywhere you need without being tied to cords or pumps.
The easy way to cut steel!The Greenlee ETS12 is a small lightweight battery-powered
Tool. Ideal for cutting bolts, threaded rod, solid hasp and cable hasp one-time locks, and shipping container seals. Hardened blades for long tool life. Because the ETS12 is small and light it is much easier to position for a cut than a manual cutter. The cutting head is compact to get into tighter spaces than a manual cutter and can be rotated 350 degrees. It cuts in about 4 to 5 seconds per cut and automatically retracts after cut.
This powerful & compact Hydraulic Bolt Cutter is the ideal tool to cut Container seals, bolts, chains, drum bolts and padlocks. This battery powered cutter can easily and safely cut up to 5/8" diameter material. Eliminate cut-of saws, torches and manual bolt cutters with these bolt cutters.
Krenn Battery Powered Bolt Cutters are a powerful, compact and ergonomic tool. Quicker, easier and safer to use than traditional bolt cutters, torches and cut-off saws. They use battery powered electric motor to drive built-in hydraulic pump. There small size gives you the power of hydraulics anywhere you need without being tied to cords or pumps.
The easy way to cut steel!The Greenlee ETS12 is a small lightweight battery-powered
Tool. Ideal for cutting bolts, threaded rod, solid hasp and cable hasp one-time locks, and shipping container seals. Hardened blades for long tool life. Because the ETS12 is small and light it is much easier to position for a cut than a manual cutter. The cutting head is compact to get into tighter spaces than a manual cutter and can be rotated 350 degrees. It cuts in about 4 to 5 seconds per cut and automatically retracts after cut.
Large Cu & Al cutting is finally made easy with the Robo Cut line of battery powered cutters. Just pull the trigger and 6.6 tons(534YC) or 9 tons(585YC) of cutting force go to work for you. The hydaulic system features a rapid advance for reduced cycle times. It has very sharp blades for cutting Cu & Al cable only. The open "C" type jaw makes reaching out to cut cables. Distortion of cable isminimum and cables can still be sleeved easily. This cutter has a release trigger to release tool.
The REC-50U Battery Powered Cable Slicer cuts 2" of cable with the touch of a finger. The powerful gear reduction motor pulls a moveable blade through the toughest Cu & Al cables. This compact unit comfortably fits in operators hand and just a squeeze of trigger is all that it takes to make cut. Risks of sprains, strains and lost time due to muscle injuries from ratcheting movement or force needed for manual cutters are eliminated. The moveable blade has wide gear teeth for extra cutting power and full cutting traction.
The Robo-Cut was desinged to cut the tough steel used in today's construction. It can replace an entire tool kit, including several sizes of bolt cutters, hacksaws, torches and cable cutters. This hydraulic unit features rapid advance ram for reduced cycle times. With the pull of trigger you can cut ACSR cable, guy wire, ground rod, wirerope and rebar. The specially designed flip-top latch and rotating head provide exceptional ease of use and maneuverability in tight working quarters.
The Robo-Cut was desinged to cut the tough steel used in today's construction. It can replace an entire tool kit, including several sizes of bolt cutters, hacksaws, torches and cable cutters. This hydraulic unit features rapid advance ram for reduced cycle times. With the pull of trigger you can cut ACSR cable, guy wire, ground rod, wirerope and rebar. The specially designed flip-top latch and rotating head provide exceptional ease of use and maneuverability in tight working quarters.
The battery powered WRCC-20 is powerful compact tool is designed to cut wire rope and can be used anywhere in the workplace. This unit generates 10 metric tons of cutting force and features titanium coated high-speed steel cutting blades. This lightweight unit comes with shoulder strap for safe and easy operation. The head can rotate 180 degrees for ease of use.
This economical tool is great general cutting. It can cut aluminum & copper cable, wire rope, ACSR cable, piano wire and soft rod. It features shear-cut blades. Ideal tool for maintenance department.
These unique Bolt Cutters are offset 30 degrees for getting into tough spots. The cutting blades are "clipper-style" for fluch cutting. Ideal bolt cutters for trimming and applications where a flush/square cut is needed.
Make tough cutting jobs safer and easier with these Bench Mounted Bolt Cutters. Their lever action motion allows you to cut material up to.354" with one hand operation. Easily mount these cutters to bench top or workstation.
This Bench Tope Wire Rope Cutter is great tool to easily and quckly cut wire rope. Ergonomic one-arm cutting action makes cutting easier on operator. Notched, shear-cut blades hold and lock cable in cutting position. These blades provide a clean and sharp cut. Can be mounted to work bench for production purposes.
The Cable Cutters feature forged alloy tool steel jaws. Shear-cut blades give clean, sharp cut with minimal distortion. Ideal cutter for AL & CU cables with lead or rubber covers. Equipped with durable metal handles. CC250R and CC500R models feature replaceable cutting heads.
The BA Series of Strap and Band Cutters feature a center cutting blade and clamping jaw to help prevent band from springing back and injuring operators. The bottom jaw has a low profile to make it easy to slide under strap or band. Forged steel blades and cutting edges provide a tough long lasting tool that outperforms the competition.
